Skip to Content
01M-101, 100 series

Two Phono Stages.
Plus Line.

A phono and line preamp in one 6HP module. Two phono stages, the classic MX180 party sound or a new discrete stage with a deeper, more relaxed sound, and a line input for everything else.

Rodec M-101 front panel
2 phono + lineMX180, discrete or line in
Unity or +20 dBGain, set by DIP switch
One buttonPhono or line
6HP, stereoRodec 100 series
02What's inside

Turntables or line. One module.

M-101 board with its two phono stages
Two phono stages

MX180 party, or deep and relaxed

Press MX180 and the module recreates the classic Rodec party sound, dynamic and lively, straight from the mixer that defined an era. Leave it unlit for a new Rodec-engineered discrete stage with a deeper, more relaxed sound.

Connecting the phono cable to the M-101 board
Phono or line

One button, two sources

With PHONO lit, the signal comes from the stereo phono socket on the board; unlit, from the line input on the 16-pin connector. In Rodec housings such as the MX Modular the RCA connectors and cables are already fitted: plug the cable into the M-101 and play. For your own housing, the cable is sold separately.

The two gain DIP switches on the M-101 board
Gain

Unity or +20 dB

The phono stage gives the standard 45 dB of phono gain. On top of that, the gain knob takes you from attenuation up to +20 dB, or up to unity: two DIP switches on the board set which.

03Specifications

Technical specifications

Phono
Stages
2, switchable: MX180 or discrete
Input
47 kΩ, 200 pF
Phono gain
45 dB, standard
Gain knob
Attenuation up to unity or +20 dB, set by DIP switch
Max input
33 mV RMS at 1 kHz
Response
9 Hz to 75 kHz (+0, −1 dB)
RIAA
Flat to approx. 0.3 dB
Line
Gain
0 dB at 12 o'clock, 20 dB max (at 1 kHz)
Output
220 Ω; load 25 kΩ recommended, 2 kΩ minimum
Format
Module
Stereo Rodec 100 series, 6HP
Fits
Rodec ONE, or the MX Modular and any 500 series rack through the 500 to 100 series adapter
Weight
70 g
04The lineup

More 100 series

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.
05Stay in the loop

New modules, first.

Launches, firmware updates and studio stories from Leuven. No spam, just analog.

Thanks for registering!