Skip to Content
01M-501, 500 series

Dial In Clean.
Drive Out Grit.

A mic / line preamp and 3-band EQ in one 500 series slot. Dual discrete op-amps and Lundahl iron deliver precision, warmth and the kind of harmonic grit that hits you right in the mix.

Rodec M-501 front panel
Up to 70 dBMic / line gain, 20 dB pad
Lundahl in + outDual discrete op-amps
3-band EQParametric mid, switchable Q
500 series48 V, Hi-Z, phase
02What's inside

Pure signal. Bold character.

M-501 board with Lundahl transformers and socketed op-amps
Preamp

Discrete op-amps, Lundahl iron

Dual discrete 6-pin op-amps in sockets, with Lundahl input and output transformers, for harmonic depth, punch and clarity. Up to 70 dB of gain takes everything from delicate ribbon mics to synths and hot line sources. A 20 dB pad and switchable 48 V phantom power cover the rest. Set your level by the LED gain meter, then drive the op-amps and transformers for colour while the output knob keeps the next stage clean.

M-501 at an angle, EQ controls
EQ

Vintage roots, modern control

The high and low bands come from the iconic 1986 Rodec MX-18, now with ±15 dB of boost and cut. In the middle sits an all-new parametric band with switchable Q: tight surgical cuts, or wide expressive sweeps when you boost and dial through the frequencies. Want the purest path? Bypass the whole EQ.

03Listen and watch

Hear it on every source.

04Specifications

Technical specifications

Preamp
Type
Microphone / line preamplifier
Gain
Up to 70 dB, LED gain indicator
Switches
48 V phantom power, Hi-Z, 20 dB pad, phase
Op-amps
2 discrete 6-pin op-amps in sockets: vintage in the input stage, modern in the output stage
Transformers
2 Lundahl, input and output
Output
Output level control
EQ
Bands
High and low, plus a parametric mid with narrow or wide Q
Bypass
Whole EQ section switchable
Format
Module
500 series, one slot
Dimensions
38 × 133 × 170 mm (W × H × D)
Weight
0.5 kg
Colour
Charcoal
05Ten slots waiting

Put it in an MX Modular

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provide both a filter and a template to use.
06Stay in the loop

New modules, first.

Launches, firmware updates and studio stories from Leuven. No spam, just analog.

Thanks for registering!